Product
HOME   RRODUCTS    paint-additives  

For Solvent base coating

paint additives

For Solvent base coating

● Wetting & Dispersing additives

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

SYNTHRO® PON 77 SB/98 LSB

6.56035/6.56031

Acid salt of amine and carboxylic acid derivative
Yellow to orange clear liquid

Active matter: 50.0/100%		 Anionic wetting additive that prevents pigment setting and flooding in solvent based systems.
- Stabilization of the pigment dispersion.
- Decreased pigment sedimentation
- Reduced tendency to sag during application on vertical surfaces
Recommended for bentone gels.

SYNTHRO® PON DAP 10

6.15354

Low MW Phosphoric ester polymer
Viscose yellow liquid
Active matter: 100%

Acid value: approx. 80.0mg KOH/g

Wetting and dispersing additive for in-organic pigment.
Shows excellent wetting effect for most of pigment and good compatibility with most of resins.
Shows excellent fluidity in high pigmented system.
It is also recommended manufacturing for RMPC and plastisol.

Addition amount: 0.3~3.0% on total formulation(for In-organic pigment)

SYNTHRO® PON DAP 10

6.15354

High MW Poly urethane polymer
Viscose yellow clear liquid
Active matter: 45.0%

Amine value: approx. 12.0mg KOH/g		 High MW polymeric wetting and dispersing additive for SB coatings and pigment concentrates.
- Gloss improvement
- Rheological behavior improvement
- Higher pigment loading
- Flocculation stability
- Color strength improvement
- Anti-flooding behavior

SYNTHRO® PON S 602

6.25602

Phosphoric ester of polyester polymer
Yellow clear liquid
Active matter: 53.0%

Acid value: approx. 58.0mg KOH/g

SYNTHRO® PON S 602 works to deflocculate, disperse and stabilize TiO2 and inorganic pigments.
It improves pigment wetting and reduces significantly the mill base viscosity.

Addition amount: 0.3~3.0% s.o.p for In-organic pigment            

● Thickener

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

SYNTHRO® THIX 625

6.12625

Sulphonated derivative
Clear to slightly opalescent liquid

Active matter:75.0%

Rheology modifier and dispersing agent for solvent borne systems, with enhanced anti-settling and
anti-sagging properties. (FDA 175-300 approved)

Easy to disperse- can be incorporated with low shear forces.

SYNTHRO® THIX
905 S/906 S

6.29905/6.29906

Poly urea derivative
Viscose yellow clear liquid
Active matter: 50.0%

Solvent: DMSO/NMP

SYNTHRO® THIX 905 S/906 S has a wide acceptance independently of the system polarity and create a
thixotropic effect even at low dosages which improves the anti-settling and anti-sagging effect.

Addition amount: 0.1~0.5% for anti-settling, 0.5~1.0% for anti-sagging.

● Leveling (Non-Silicone & Silicone type)

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

MODAREZ® MF
AX/AEX/AOH

6.25328/6.25330/6.25329

Low MW Acrylic co-polymer
Viscose pale yellow clear liquid

Active matter: >97.0%

Low MW reactive acryl leveling additives (AX: Carboxyl, AEX: Epoxy, AOH: Hydroxyl).
Improves leveling, Substrate wetting and flow (Reduction crater, pin-hole and orange peel).
Increases the gloss and Does not cause haze in clear coat.

Acts air release additive (FDA 175-300 approved)

MODAREZ® MFP
C/G52 S

6.25321/6.25385

Low MW Acrylic co-polymer
Viscose pale yellow clear liquid

Active matter: >97.0/52.0%

Low MW acryl leveling additives
Improves leveling, flow and spreading.(Especially, effective for improvement Gloss)
Does not cause haze in clear coating.

No negative effect on the intercoat adhesion (FDA 175-300 approved).

MODAREZ® MF P E

6.25343

High MW Acrylic co-polymer
Viscose pale yellow clear liquid

Active matter: >97.0

High MW acryl leveling additives
Improves leveling and surface hardness.
Reduces surface tension imparting excellent substrate wetting.

Shows good defoaming effect (FDA 175.105~176.180 approved).

MODAREZ® PSL 2000

6.25379

Very low MW organic polymer
Pale yellow clear liquid

Active matter: 100%

Very low MW organic polymer type leveling additives
Excellent leveling by reducing pin-holes, caters and orange peel effect.

Increases gloss and does not cause any haze in clear coat.

MODAREZ® X 043

6.19627		 Phosphoric ester derivative
Colorless clear liquid

Acid value: approx. 18.0mg KOH/g

Non-silicone type leveling additive for WB, SB (Excellent compatibility for most of systems)
Improves substrate wetting and flow (Reduction crater, de-wetting).
Acts air release additive.

Shows good wetting for most of pigment.

MODAREZ® X 080

6.54472

Organic formulation
Viscose pale yellow clear liquid

Active matter: 100%

Super substrate wetting additive for SB
Improves the substrate wetting on difficult to wet substrates.
Prevents the defect of ghosting and cratering.

No negative effect on the intercoat adhesion.

MODAREZ®
K-SL106/K-SL107/K-SL108

6.00101/6.00110/6.00111

Poly ether modified poly siloxane
(K-SL106, K-SL107)
Aryl alky modified poly siloxane
(K-SL 108)
Viscose yellow clear liquid

Active matter: 100%

< MODAREZ® K-SL106>
Shows good surface slip, substrate wetting and prevents surface defect (Crater, pin-hole etc)
Displays excellent compatibility with most of solvent base systems.
< MODAREZ® K-SL107>
Shows Excellent surface slip, substrate wetting and prevents surface defect (Crater, pin-hole etc)
< MODAREZ® K-SL108>
Improves substrate wetting with medium reduction of surface tension.

Displays good heat resistance, defoaming effect and less influence re-coattability.

● Defoamer

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

MOUSSEX® K-348 SL

6.54348

Special modified poly-siloxane
Colorless clear liquid

Solvent: Butyl acetate

Representative silicone defoamer for Solvent and solvent free base.
Excellent defoaming effect for Epoxy, Urethane, Alkyd-melamine, Chlorinated rubber and Acryl systems.
No oil contamination on coating and No influence intercoat adhesion.

Addition amount: 0.1~1.0% on total formulation

MOUSSEX®
K-349 L/00130

6.54349/6.00130

Special modified polymer
Colorless clear liquid
Active matter: 30.0/100%

Solvent: Mineral spirit(K-349L)

Silicone free, Polymeric defoamer
Highly incompatible therefore shows excellent defoaming performance in polar as well as in non polar systems.
Especially suitable for solvent free system like PUR, Epoxy-floorings.

MOUSSEX® 00130 is 100% active and VOC free.

MOUSSEX® K-350 L

6.00166

Polyoxyalkylene derivative
Colorless clear liquid

Active matter: 100%

Silicone free, Surfactant type defoamer
Mainly recommended using PVC, Plastisol industry.

Shows Excellent compatibility with most of systems and Does not cause any defect on coating.

MOUSSEX® SF 561

6.15372

Phosphoric ester derivative
Colorless clear liquid

Active matter: 100%

Excellent De-aerating additive for WB, SB.
It gives most stable and long-lasting effect without problem of residues.

It can be used both Water base and Solvent base system.

MOUSSEX® 388 SL

6.12018

High MW Poly-siloxane compound with silica
Viscose white cloud liquid

Active matter: 100%

Excellent De-aerating additive for WB, SB.
It gives most stable and long-lasting effect without problem of residues.

It can be used both Water base and Solvent base system.

● Anti-static additive

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

SYNTHRO® STAT
EB/K-EBN

6.56051/54381

Quaternary ammonium salt
Yellow clear liquid

Active matter:75.0%

Conductivity and anti-static additive with high performance for industrial coatings(Halogen free)
SYNTHRO® STAT K-EBN has anti-corrosion effect.

Addition amount: 0.1~0.5% on total formulation

● Corrosion inhibitor

PRODUCT / CODE PRODUCT DESCRIPTION SPECIFIC PROPERTY AND APPLICATION

SYNTHRO® COR 221

6.12221

Organic formulation
Yellow clear liquid

Active matter: 11.0%

Corrosion inhibitor for printing equipment cleaning formulations.
Protect the interior of tin-plates packaging against corrosion through the formation of an organic protective

film passivation layer.

SYNTHRO® COR AM 35 B

6.12914

Amine salt of sulphonated derivative
Brown clear liquid

Active matter: 35.0%

Corrosion inhibitor additive for water and solvent based systems. Easy incorporation, strong efficiency,
and acts as a synergist with anti-corrosive pigments.

Addition amount: 1.0~3.0% on total formulation

SYNTHRO® COR BA 50 MS

6.12398

Barium salt of sulphonated derivative
Brown clear liquid

Active matter: 50.0%

Corrosion inhibitor additive, wide compatibility in solvent-based systems.

Zinc phosphate replacement.

SYNTHRO® COR CA 50 B

6.12911

Calcium salt of sulphonated derivative
Brown clear liquid

Active matter: 50.0%

Corrosion inhibitor additive for water and solvent-based systems.

Improves pigment dispersion.

SYNTHRO® COR ZN 50 B

6.12912

Zinc salt of sulphonated derivative
Brown clear liquid

Active matter: 50.0%

Corrosion inhibitor additive for water based and with high efficiency in solvent-based systems.

Catalyst for amino resins. Improves adhesion on zinc-treated surfaces.

SYNTHRO® COR RC 227

6.12227

Organic acids mixture
Brown clear liquid

pH: 1.5~2.0

Liquid rust converter based on tannic acid.
It converts the rust to a non corroding matter and prevents the new oxidation.

Rust inhibitor synergist in primer based on air drying solvent borne (alkyd, acrylic, chlorinated rubber systems) containing anticorrosive pigments.